Hastelloy B / N010001 / Hex Bolt
JM Hardware® Professional Hastelloy B / N010001 / 2.4800 ALLOY Fastener Manufacturer
Hastelloy B has good corrosion resistance to reducing environments such as moderate concentrations of sulfuric acid and other non-oxidizing acids, and is very resistant to chloride ion stress corrosion cracking, but is highly susceptible to corrosion by oxidizing environments and cannot be used. In environments containing iron or copper salts, these materials can cause corrosion quickly.
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Product Introduction
Hastelloy B, designated as N010001 with the material number W.Nr. 2.4800, stands as a remarkable alloy renowned for its extraordinary properties. This nickel-based alloy is distinguished by its superb resistance to a wide array of corrosive environments, including acids, oxidizers, and reducing agents. Its versatility extends to maintaining structural integrity and performance under high-temperature conditions, making it an ideal choice for applications in aggressive chemical settings, aerospace, and beyond.
When you choose JM Hardware®, you're not just acquiring fasteners; you're investing in the assurance of quality, reliability, and performance. Welcome to a world where excellence meets precision in every fastener we produce.
Product Display
Hastelloy B / N010001 / Hex Flange Nut
Hastelloy B / N010001 / Square Washer
Quality Control
JM Hardware conducts product quality control in strict accordance with ISO 9001 standards to ensure that our products meet high quality standards. Below are our five quality control steps:
1
1
Incoming material control
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
1
1
First part control
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
1
1
Self-inspection by workers during mass production
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
1
1
QC inspection during mass production
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
1
1
Finished product control
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
1
1
Non-conforming goods management
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
These quality control measures constitute JM Hardware's quality management system, and we are constantly striving to improve the quality of our products and are committed to meeting the needs of our customers. We believe that quality control is the key to our success.
Production equipment
Testing Equipment
Test report
JM Hardware® provides each batch of products with a finished product test report issued by our laboratory. If you need a test report issued by a third party, please inform us separately. The following two templates are for reference
SGS testing report
JM Hardware® testing report
Packing
Why Choose Us
Registered trademarks
RegisterJM in USA，EU ，UK，Quality Assuranc
Strong R&D Capability
Successfully developed 680+ new products in past 16 years
Rich Industry Experience
JM has the rich experience to supply the high quality fasteners to Project contractor
Mature & professional service teams
Provides 24/7 online and offline services for you,70%stuff have 5+ working experience in JM
Rich export experience
15+ years exported to 70+ countries
Supply one-stop service & DDP term
Help clients purchase other products,realize door-to-door service to make international procurement more convenient
Certificate
Valued Partners
JM Hardware @ has exported its hardware parts to over 85 countries around the world.
We will make unremitting efforts to provide hardware parts with high quality and reasonable prices for our customers.
Hastelloy B has good corrosion resistance to reducing environments such as moderate concentrations of sulfuric acid and other non-oxidizing acids, and is very resistant to chloride ion stress corrosion cracking, but is highly susceptible to corrosion by oxidizing environments and cannot be used. In environments containing iron or copper salts, these materials can cause corrosion quickly.
| Hastelloy B Chemical composition | |||||||||||
% | Ni | Mo | Fe | Co | Cr | C | Mn | Si | P | S | V |
| Min | remained | 26 | 4 | 0.2 | |||||||
| Max | 30 | 6 | 2.5 | 1 | 0.05 | 1 | 1 | 0.04 | 0.03 | 0.4 | |
| Hastelloy B Physical property | |
density | 9.24 g/cm3 |
| melting point | 1330-1380℃ |
Different Countries Steel No. Chart
| Model | GB | ASTM | DIN | BS | AFNOR | |
| New grades | Old grades | |||||
| Hastelloy C-276 | NS3304 | NS334 | UNS N10276 | W.Nr.2.4819 / NiMo16Cr15W | NC17D | |
| Hastelloy C-4 | 2.461 | |||||
| Hastelloy C-22 | NS3308 | UNS N06022 | W.Nr.2.4602 | |||
| Hastelloy C-2000 | UNS N06200 | 2.4675 | ||||
| Hastelloy C-59 | UNS N06059 | 2.4605 | ||||
| Hastelloy B | NS3201 | NS321 | UNS N10001 | 2.4800 | ||
| Hastelloy B-2 | NS3202 | NS322 | UNS N10665 | 2.46 | NiMo28 | |
| Hastelloy B-3 | NS3203 | UNS N10675 | 2.46 | |||
| Hastelloy X | UNS N06002 | 2.4665 | ||||
Forms of Hastelloy B Fastener Available at JM-INDUSTRY
| Product name | Standard No. | Size | |
| BOLT | HEX HEAD BOLT | ANSI/ASME B18.2.1, DIN933, DIN931 | 1/4”-4”, M5-M100 |
| SOCKET CAP SCREW | ANSI/ASME B18.3, DIN912, DIN7991, DIN913/916 | 1/4”-4”, M5-M100 | |
| FLANGE BOLT | ANSI/ASME B18.2.3.4M-2001, DIN 6921 | 1/2”-4”, M10-M100 | |
| EYE BOLT | ANSI/ASME, DIN standard | 1/2”-4”, M10-M100 | |
| OTHER BOLT | U BOLT, T BOLT, J BOLT, SQURE HEAD BOLT, SHOULDER BOLT, AND NON-STANDARD BOLT ACCORDING TO CUSTOMER NEEDS. | ||
| STUD | THREADED ROD/BAR | ANSI/ASME, DIN975/DIN976 | 3/8”-4”, M5-M100 |
| DOUBLE ENDS STUDS | ANSI/ASME, DIN STANDARD | 3/8”-4”, M5-M100 | |
| NUT | HEX NUT | ANSI/ASME B18.2.2, DIN934 | 1/4”-4”, M5-M100 |
| HEAVY HEX NUT | ANSI/ASME B18.2.2, DIN standard | 1/2”-4”, M12-M100 | |
| NYLON LOCK NUT | ANSI/ASME B18.16.6-2008, DIN 985,DIN982 | 1/2”-4”, M12-M100 | |
| FLANGE NUT | ANSI/ASME, DIN6923 | 1/2”-4”, M12-M100 | |
| COUPLING NUT/LONG NUT | ANSI/ASME, DIN STANDARD | 1/2”-4”, M12-M100 | |
| SQUARE NUT | ANSI/ASME, DIN 557 | 1/2”-4”, M12-M100 | |
| HEX DOOMD CAP NUT | ANSI/ASME, DIN1587 | 1/2”-4”, M12-M100 | |
| WING NUT | ANSI/ASME, DIN315 | 1/2”-4”, M12-M100 | |
| WASHER | FLAT WASHER | ANSI/ASME B18.22.1, DIN125 | 3/8”-4”, M6-M100 |
| SPRING WASHER | ANSI/ASME B18.21.1, DIN127 | 3/8”-4”, M6-M100 |
JM Hardware® Inspection Process Showcase
Raw material testing
Size Detection
GO Gauge and NO-GO Gauge Detection
Chemical Composition Detection
Mechanical Properties Test
After all inspections, you will receive the product carefully boxed by JM Hardware®
If you are interested in any Hastelloy B fastener, please send an email to xarella.huang@jm-fastener.com.
Your fastener needs are in good hands with JM Hardware®!
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs
xarella.huang@jm-fastener.comOur address
Add: Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C
Contact person: xarella.huang
Whatsapp: +86 13681923533
Wechat:+86 18621005605
Shortcut links
Products
Contact with us
Since our establishment in 2006, JM has been adhering to the mission of creating maximum value for customers by providing differentiated services, and making a positive contribution to the society.