Registered trademarks
RegisterJM in USA，EU ，UK，Quality Assuranc
JM Hardware | hex coupling nut
Shanghai Jian & Mei Industry and Trade Co., Ltd is actively working to bring new hex coupling nut to market.
JM Hardware has developed to be a professional manufacturer and reliable supplier of high-quality products. Throughout the whole production process, we strictly implement the ISO quality management system control. Since established, we always adhere to independent innovation, scientific management, and continuous improvement, and provide high-quality services to meet and even exceed customers' requirements. We guarantee our new product hex coupling nut will bring you a lot of benefits. We are always standby to receive your inquiry. hex coupling nut Having devoted a lot to product development and service quality improvement, we have established a high reputation in the markets. We promise to provide every customer throughout the world with prompt and professional service covering the pre-sales, sales, and after-sales services. No matter where you are or what business you are engaged in, we'd love to help you deal with any issue. If you want to know more details about our new product hex coupling nut or our company, feel free to contact us.The materials of JM Hardware hex coupling nut are sourced strictly according to the production plan.
Product Introduction
U bolts available in a range of sizes and finishes to support different loads, torque requirements and environments.
A U-bolt is an industrial fastener in the shape of the letter U with two threaded arms (or legs) extending from a curved base. U bolts are typically used to support pipework or to attach a part to a pole, beam or wall, where the “u” shape keeps it firmly in place, adding stability to the support.
The threaded ends are designed for use with washers and screws, and can also be used with a crosspiece spanning both threaded arms of the bolt, to make it more secure in certain settings and uses. U-bolts are designed to be inserted through holes that have already been drilled or punched.
Often used as framing fasteners and anchors for foundations and roofs, pipe and conduit holders and bolts for motor and engine shaft components.
Product Parameters
Product Details
The cut surface is flat and can stand on the table
The product fits perfectly on the desktop when placed flatPremium multipurpose one page template
Quality Control
JM Hardware conducts product quality control in strict accordance with ISO 9001 standards to ensure that our products meet high quality standards. Below are our five quality control steps:
1
1
Incoming material control
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
1
1
First part control
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
1
1
Self-inspection by workers during mass production
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
1
1
QC inspection during mass production
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
1
1
Finished product control
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
1
1
Non-conforming goods management
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
These quality control measures constitute JM Hardware's quality management system, and we are constantly striving to improve the quality of our products and are committed to meeting the needs of our customers. We believe that quality control is the key to our success.
Production equipment
Testing Equipment
Magnetic particle flaw detectorTest report
SGS testing report --310S bolt nut
Third-party testing report-P1
Third-party testing report-P2
JM Hardware® testing report
Packing
Why Choose Us
Strong R&D Capability
Successfully developed 680+ new products in past 16 years
Rich Industry Experience
JM has the rich experience to supply the high quality fasteners to Project contractor
Mature & professional service teams
Provides 24/7 online and offline services for you,70%stuff have 5+ working experience in JM
Rich export experience
15+ years exported to 70+ countries
Supply one-stop service & DDP term
Help clients purchase other products,realize door-to-door service to make international procurement more convenient
Certificate
Valued Partners
JM Hardware @ has exported its hardware parts to over 85 countries around the world.
We will make unremitting efforts to provide hardware parts with high quality and reasonable prices for our customers.
1. Standard: ASME/ANSI B18.2.2; DIN934, DIN555
2. Size: 1/4''–1-1/2’’; M6 – M42
3. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass
4. Grade: SAE J995 Gr.2, 5,8; CL4, 5, 6, 8, 10, 12
5. Thread: M, UNC, UNF
6. Finish: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, H.D.G.
7. Packing: bulk in cartons (25kg Max.)+wood Pallet or according to customer special demand
8. Application: Structural Steel; Metal Buliding; Oil&Gas; Tower&Pole; Wind Energy; Mechanical Machine; Automobile: Home Decorating
9. Test Equipments: Caliper,Go&No-go gauge,Tensile test machine,Hardness tester,Salt spraying tester, H.D.G. thickness tester, 3D detector, Projector, Magnetic flaw detecter
10. Supply Ability: 1000 tons per month
11. MinimumOrde: 1000kgs for each specification
12. Trade Term: FOB/CIF/CFR/CNF/EXW/DDU/DDP
13. Payment Term: T/T, L/C , D/A , D/P, etc
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
xarella.huang@jm-fastener.comOur address
Add: Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C
Contact person: xarella.huang
Whatsapp: +86 13681923533
Wechat:+86 18621005605
Shortcut links
Products
Contact with us
Since our establishment in 2006, JM has been adhering to the mission of creating maximum value for customers by providing differentiated services, and making a positive contribution to the society.