Registered trademarks
RegisterJM in USA，EU ，UK，Quality Assuranc
sems screw | JM Hardware
Shanghai Jian & Mei Industry and Trade Co., Ltd offers factory price with best quality products.
Guided by scientific and technological innovation, JM Hardware always keeps outward-oriented and sticks to the positive development on the basis of technological innovation. sems screw Today, JM Hardware ranks the top as a professional and experienced supplier in the industry. We can design, develop, manufacture, and sell different series of products on our own combining the efforts and wisdom of all our staff. Also, we are responsible for offering a wide range of services for customers including technical support and prompt Q&A services. You may discover more about our new product sems screw and our company by directly contacting us.Shanghai Jian & Mei Industry and Trade Co., Ltd managed to grow niche markets and give exceptional customer service.
Product Introduction
A self-tapping screw is a screw that can tap its own hole as it is driven into the material. More narrowly, self-tapping is used only to describe a specific type of thread-cutting screw intended to produce a thread in relatively soft material or sheet materials, excluding wood screws. Other specific types of self-tapping screw include self-drilling screws and thread rolling screws
Product Parameters
| Self tapping screw | |
| Standard： | ASME B18.6.4 & SAE J81 DIN6928, DIN7971, DIN7972, DIN7973, DIN7976 ,DIN7981, DIN7982, DIN7983, DIN968 |
| Size: | #4(2.8)-1/2" , Length: 10-180mm (3/8”- 7”) |
| Material: | C1022+ heat treatment, SS304, SS316, SS410 |
| Finish: | zinc plated(clear/bule/yellow), black/grey phosphate,nickel, ruspert |
Product Display
Quality Control
JM Hardware conducts product quality control in strict accordance with ISO 9001 standards to ensure that our products meet high quality standards. Below are our five quality control steps:
1
1
Incoming material control
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
We carry out strict incoming material control by conducting dimensional tests on each batch of raw materials and checking the raw material reports from the steel mills. This ensures that the raw materials we use are within specification and provide a reliable basis for production.
1
1
First part control
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
After the mold assembly is completed, we conduct a thorough inspection of the first production part and make detailed records. Only qualified first parts can be released to start mass production. This step ensures that the quality of the product meets the standard at the beginning.
1
1
Self-inspection by workers during mass production
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
In the mass production process, we require the workers of each machine to carry out self-inspection every hour. If any substandard product is found, we will immediately pick or scrap the production within this hour until the problem is solved and meets the standard of conformity, and then we can continue the production. This self-inspection mechanism helps to find and solve problems in time during the production process.
1
1
QC inspection during mass production
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
In addition, every two hours, the quality inspection personnel will carry out random inspection on the products of each machine. Only qualified products can continue to flow into the next production stage. If non-conforming products are found, we will take the same selection or scrapping measures and ensure that the problem is properly handled. This helps provide additional quality assurance.
1
1
Finished product control
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
Finally, after each batch of finished product is made, we conduct random inspections in proportion to the order. Qualified products will be packaged and put into storage, while unqualified products will be returned for further analysis and rectification. We insist on ensuring that the quality of our products meets high standards so that we can provide reliable products to our customers.
1
1
Non-conforming goods management
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
According to the process of JMhardware's non-conforming products handling, pick or scrap. And the problem of rectification and tracking reasons to ensure that non-conforming products will not flow into the market.
These quality control measures constitute JM Hardware's quality management system, and we are constantly striving to improve the quality of our products and are committed to meeting the needs of our customers. We believe that quality control is the key to our success.
Production equipment
Testing Equipment
Packing
Why Choose Us
Strong R&D Capability
Successfully developed 680+ new products in past 16 years
Rich Industry Experience
JM has the rich experience to supply the high quality fasteners to Project contractor
Mature & professional service teams
Provides 24/7 online and offline services for you,70%stuff have 5+ working experience in JM
Rich export experience
15+ years exported to 70+ countries
Supply one-stop service & DDP term
Help clients purchase other products,realize door-to-door service to make international procurement more convenient
Certificate
Valued Partners
JM Hardware @ has exported its hardware parts to over 85 countries around the world.
We will make unremitting efforts to provide hardware parts with high quality and reasonable prices for our customers.
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}}
Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
xarella.huang@jm-fastener.comOur address
Add: Rm.27202, No.295 South Lingyan Road, Pudong,Shanghai,P.R.C
Contact person: xarella.huang
Whatsapp: +86 13681923533
Wechat:+86 18621005605
Shortcut links
Products
Contact with us
Since our establishment in 2006, JM has been adhering to the mission of creating maximum value for customers by providing differentiated services, and making a positive contribution to the society.